Allied Telesis AT-S41 - Manual (Page 148)

AT-S41 User’s Guide
148
Downloading a New Management Software Image Using TFTP
TFTP software is available from various sources and is included in SNMP
which can be purchased through Allied Telesyn. A command line version
is included in most UNIX variants and in Windows NT. Please consult the
documentation or the manufacturer of the software used on the proper
use of the software.
You will need to provide the following information when using TFTP
client software to download the AT-S41 software image:
❑ Set TFTP Server IP Address
❑ Set Image File Name
❑ Upgrade Image and Reboot
❑ Set Retry Count
This procedure assumes that you have already obtained a copy of TFTP
software and have stored it on the computer from which you will be
performing this procedure.
To download the new AT-S41 software image onto your AT-8326GB
switch, perform the following procedure:
1. Establish a local management session on the switch where you intend
to download the new management software.
For instructions, refer to Starting a Local Management Session
on page 28.
2. From the Main Menu, type T to select Switch Tools.
3. From the Switch Tools Configuration Menu, type U to select Software
Upgrade.
4. From the Software Upgrade Menu, type T for TFTP Software Upgrade.