Allied Telesis AT-S41 - Manual (Page 153)

AT-S41 User’s Guide
153
Starting a Web Browser Management Session
This section explains how to start a Web browser management session.
Note
In order for you to manage an AT-8326GB stack using a Web
browser, the switch must have an IP address. Initially assigning an IP
address to a switch can only be done through a local management
session. For instructions, refer to Configuring an IP Address on
page 34.
To start a Web browser management session, perform the following
procedure:
1. Start your Web browser.
2. Enter the IP address of the switch you want to manage in the URL field
of the Web browser, as shown in Figure 44. To manage an AT-8326GB
switch stack, enter the IP address of the master switch of the stack.
Figure 44 Entering a Switch’s IP Address in the URL Field
3. When prompted, enter the login name and password. The default
user name and the default password are both “manager”. (The login
name and password are case-sensitive.)
To change the login name or password, refer to Setting the User
Interface Configuration on page 38.
Switch’s IP Address