Allied Telesis AT-S41 - Manual (Page 138)

AT-S41 User’s Guide
138
Activating Broadcast Storm Control
To activate the Broadcast Storm Control feature for the switch, perform
the following procedure:
1. From the Main Menu, type B to select Basic Switch Configuration.
2. From the Basic Switch Configuration Menu, type C to select Storm
Control Configuration.
The Storm Configuration Menu is displayed in Figure 36.
Figure 36 Storm Configuration Menu
3. Type B to select Set Broadcast Status.
The following prompt is displayed:
Enable or Disable Broadcast Storm Control (E/D)>
4. Type E to enable Broadcast Storm Control or D to disable Broadcast
Storm Control. The default setting is Disabled.
5. To configure threshold on the Broadcast Storm Control feature for the
switch, type T to set Threshold.
The following prompt is displayed:
Enter Threshold Level >
The values available for the threshold level are:
L - Low (1000 64-byte packets per second)
M - Medium (2000 64-byte packets per second)
H - High (5000 64-byte packets per second)
The default threshold level is Low.
6. Select a threshold level.
AT-8326B Local Management System
Enter the character in square brackets to select option
Basic Switch Configuration -> Storm Configuration Menu
Broadcast Storm Status: Disabled
Threshold : Low
----------------------------- ----------------------------
Set [B]roadcast Status
Set [T]hreshold
[Q]uit to previous menu
Command> _
Enter the character in square brackets to select option