Allied Telesis AT-S41 User Manual

Page 202

Text mode
Original mode

AT-S41 User’s Guide

202

For example, if you wanted to make Port 5 an untagged port of a
VLAN with a VID of 7, you would change the PVID for Port 5 to the
value 7.

4. Click the Apply button.

Once a new PVID has been assigned to a port, the port is removed as
an untagged port from its current VLAN and added to the new VLAN
as an untagged port.

If the port is also an tagged member of any VLANs, it remains as a
tagged member of those VLANs.

5. Repeat steps 2 and 4 to assign new PVIDs to any other ports in the

stack that are to be untagged members of the new VLAN.

This completes the procedure for creating a new VLAN. To
confirm the creation of the new VLAN, go to the next procedure.