Allied Telesis AT-S41 - Manual (Page 118)

AT-S41 User’s Guide
118
Displaying MAC Addresses
To display the MAC address table, perform the following procedure:
1. From the Main Menu, type B to select Basic Switch Configuration.
2. From the Basic Switch Configuration Menu, type F to select
Forwarding Database.
The Forwarding Database Menu is displayed in Figure 31.
Figure 31 Forwarding Database Menu
3. To display the MAC addresses, select from the options below. To
select an option, type its corresponding bracketed letter.
[S]tatic Address Table
This displays the static address table, which lists all static
addresses assigned to ports on the switch.
Display MAC Address by [P]ort
This displays both the static and dynamic MAC addresses on a
selected port.
Display MAC Address by [M]AC
This displays all static and dynamic MAC addresses on a switch.
Display MAC Address by [V]ID
This displays all MAC addresses by VLAN ID.
AT-8326GB Local Management System
Enter the character in square brackets to select option
Advanced Switch Configuration -> Forwarding Database Menu
[S]tatic Address Table
Display MAC Address by [P]ort
Display MAC Address by [M]AC
Display MAC Address by [V]ID
[Q]uit to previous menu
Command> _
Enter the character in square brackets to select option