Allied Telesis AT-S41 - Manual (Page 119)

AT-S41 User’s Guide
119
The management software displays the MAC addresses based on
your selection. Figure 32 is an example of the Display MAC
Address by MAC option, which displays both static and dynamic
MAC addresses.
Figure 32 Display MAC Address by MAC Menu
The Forwarding Database is for viewing purposes only except for
Set Age-Out Time. The columns on the menu are defined below.
MAC Address
The MAC addresses of the end nodes connected to the switch.
Stack ID
The stack ID of the switch on which the MAC address was learned.
Port
The port on the switch where the MAC address was learned.
Set [A]ge-Out Time
This allows you to manually set the MAC address age-out time.
The range is 10 to 1048 Seconds. The default setting is 300.
AT-8326GB Local Management System
Forwarding Database Menu -> Display MAC Address by MAC
Age-Out Time: 300 Sec.
MAC Address Stack ID Port
----------------- ---------- ----
00:40:33:FF:01:59 2 4
00:40:33:FF:01:5A 2 5
00:40:33:FF:01:5B 2 6
00:40:33:FF:01:5C 2 7
00:40:33:FF:01:5D 2 8
00:40:33:FF:01:5E 2 9
00:40:33:FF:01:5F 2 10
00:40:33:FF:01:60 2 11
00:40:33:FF:01:61 2 12
00:40:33:FF:01:62 2 13
-------------------------------- --------------------
[N]ext Page Set [A]ge-Out time
[P]revious Page [Q]uit to previous menu
Command>
Enter the character in square brackets to select option