Allied Telesis AT-S41 User Manual

Page 210

Text mode
Original mode

AT-S41 User’s Guide

210

Note

The ports that you just added to the new VLAN are not removed
from their current VLAN assignments. You must remove the ports
manually from the other VLANs if you do not want them to be
shared. For instructions, refer to Viewing or Modifying a Port-
based VLAN on page 211.

Note

There are two additional buttons in the bottom right-hand corner of
the page. The Restore button will cancel any changes you have
made to the VLAN since using the Apply button. The Clear button
removes all check marks from all check boxes, letting you re-start
the port selection process.