Allied Telesis AT-S41 - Manual (Page 107)

AT-S41 User’s Guide
107
Creating a Port-based VLAN
To create a new port-based VLAN, perform the following procedure:
Note
This procedure assumes that the switch is set to the Port-based
VLAN Type. For instructions on how to change the VLAN Type on the
switch, refer to Setting the VLAN Type on page 114.
1. From the Main Menu, type A to select Advanced Switch Configuration
Menu.
2. From the Advanced Switch Configuration Menu, type V to select
VLAN Management.
The VLAN Management Menu is displayed.
3. From the VLAN Management Menu, type T to select Set VLAN Type.
The following prompt is displayed.
Set VLAN type (P/8)>
4. From the VLAN Management Menu, type C to Create VLAN.
The VLAN Creation Menu is displayed in Figure 29.
Figure 29 VLAN Creation Menu
AT-8326GB Local Management System
Advanced Switch Configuration -> VLAN Creation Menu
VLAN Index :
VLAN Name :
Port Member
------------------------------------------------------
---------------------------- -----------------------------
Set VLAN [I]D/[I]ndex [S]elect Port Member
Set VLAN [N]ame [A]pply
[Q]uit to previous menu
Command> _
Enter the character in square brackets to select option