Allied Telesis AT-S41 - Manual (Page 147)

AT-S41 User’s Guide
147
The Send File pop-up window is displayed in Figure 41.
Figure 41 Send File Window
9. Click the Browse button on the Send File window to specify the
location of the software.
10. Click on the Protocol field and set to 1K Xmodem transfer protocol.
11. Click Send.
The software immediately begins to download onto the switch’s
CPU. As this process begins, the Xmodem File Send window
displays current status of the software download. This process will
take minutes to complete.
The XModem File Send window is displayed in Figure 42.
Figure 42 XModem File Send Window
Once the new software download process has completed, the
switch begins to initialize the software. This process takes a few
minutes. Once the initialization process is complete, the switch
will automatically reboot.
Note
Do not interrupt the initialization process.