Allied Telesis AT-S41 - Manual (Page 21)

AT-S41 User’s Guide
21
SNMP Management Session
Another way to remotely manage an AT-8326GB switch is with an SNMP
management program, such as HP Openview. A familiarity with
Management Information Base (MIB) objects is necessary to manage a
switch with an SNMP management program, as this management
method requires loading the AT-8326GB Fast Ethernet switch MIBs into
the SNMP management program. For instructions, refer to your SNMP
management documentation.
The AT-S41 software supports the following MIBs:
❑ SNMP MIB-II (RFC 1213)
❑ Bridge MIB (RFC 1493)
❑ 4-Group RMON MIB (RFC 1757)
❑ Allied Telesyn Enterprise MIB
Note
SNMP management does not utilize the stacking feature of the AT-
8326GB switch. Consequently, you must assign an IP address to
each switch that you want to manage with an SNMP program.