Allied Telesis AT-S41 - Manual (Page 159)

AT-S41 User’s Guide
159
Configuring System Administration Information
The procedure in this section explains how to assign a name to the
switch, along with other optional information, such as the name of the
administrator responsible for maintaining the unit and the location of
the switch.
To set a switch’s administration information, perform the following
procedure:
1. Click on the Basic Config menu tab and select Admin Config from the
sub-menu.
The Administration Configuration page is displayed, as shown in
Figure 47.
Figure 47 Administration Configuration Menu
2. Change the parameters as desired, by entering the new information
in the data entry fields and clicking the Apply button.
The parameters on the Administration Configuration page are
described below:
System Description
This parameter specifies the model name of the switch. This
parameter cannot be changed.
System Object ID
This parameter specifies the numeric ID of the switch. This
parameter cannot be changed.