Allied Telesis AT-S41 - Manual (Page 102)

AT-S41 User’s Guide
102
The Config VLAN Member Menu for the VLAN is displayed, as
shown in Figure 27. This menu contains all the current
information about the VLAN.
Figure 27 Config VLAN Member Menu
This menu, when initially displayed, lists the ports on the master
switch that belong to the selected VLAN. The columns in the menu
are defined below:
Port
This column lists the ports on the selected switch that are members of
the VLAN.
Participation
This column indicates whether the port is participating in GVRP.
Tagging
This column indicates whether the port is a tagged or untagged port
of the VLAN. No indicates that the port is an untagged member while
Yes indicates that it is a tagged member.
5. To change the VLAN’s name, type C to select Change a VLAN Name
and enter the new name when prompted.
6. To add or remove tagged ports from the VLAN, do the following:
Note
To add or remove untagged ports from the VLAN, perform Phase 2
below.
AT-8326GB Local Management System
VLAN MAnagement-> Config VLAN Member Menu
Stack ID: 1 VLAN ID: 3 VLAN Name: Engineering
Port Participation Tagging
---- ------------- -------
8 Static No
9 Static No
10 Static No
11 Static No
16 Static No
23 Static No
------------------------------Command----------------------------
[N]ext Page [C]hange VLAN Name [A]dd VLAN Member
[P]revious Page [M]odify Participation [R]emove VLAN Member
Select Stack [I]D [Q]uit to previous menu
Command> _
Enter the character in square brackets to select option