beautypg.com

Configure authenticator – Allied Telesis AT-9724TS User Manual

Page 87

background image

Configure Authenticator

To configure the 802.1X Authenticator Settings, click PAE Access Entity > Configure Authenticator:

Figure 6- 75. 802.1X Authenticator Settings window

To view the 802.1X Authenticator settings on a different switch in the switch stack, use the Unit pull-down menu to select that switch by its ID number in the

switch stack.To configure the settings by port, click on the hyperlinked port number under the Port heading, which will display the following table to configure:

Figure 6- 76. 802.1X Authenticator Settings – Modify

86

Allied Telesyn AT-9724TS High-Density Layer 3 Stackable Gigabit Ethernet Switch

See also other documents in the category Allied Telesis Computer hardware: