Allied Telesis AT-9724TS - Manual (Page 183)

Figure 9- 36 .OSPF Virtual Neighbor Table
DVMRP Monitoring
This menu allows the DVMRP (Distance-Vector Multicast Routing Protocol) to be monitored for each IP interface defined on the Switch.This folder, found in
the Monitoring folder, offers 3 screens for monitoring; Browse DVMRP Routing Table, Browse DVMRP Neighbor Address Table and Browse
DVMRP Routing Next Hop Table. Information on DVMRP and its features in relation to the AT-9724TS can be found in Chapter 6, under IP Multicast
Routing Protocol.
Browse DVMRP Routing Table
Multicast routing information is gathered and stored by DVMRP in the DVMRP Routing Table, which may be found in the Monitoring folder under
Browse DVMRP Monitoring, contains one row for each port in a DVMRP mode. Each routing entry contains information about the source and multicast
group, and incoming and outgoing interfaces.You may define your search by entering a Source IP Address and its subnet mask into the fields at the top of the
page.
Figure 9- 37 . DVMRP Routing Table
Browse DVMRP Neighbor Address Table
This table, found in the Monitoring menu under DVMRP Monitor > Browse DVMRP Neighbor Address Table contains information about
DVMRP neighbors of the Switch.To search this table, enter either an Interface Name or Neighbor Address into the respective field and click the Find
button. DVMRP neighbors of that entry will appear in the DVMRP Neighbor Table below.
Figure 9- 38. DVMRP Neighbor Table
182 Allied Telesyn AT-9724TS High-Density Layer 3 Stackable Gigabit Ethernet Switch