Allied Telesis AT-9724TS - Manual (Page 74)

Parameter Description
Index Syslog server settings index (1-4).
Server IP The IP address of the Syslog server.
Severity This drop-down menu allows you to select the level of messages that will be sent.The options are Warning,
Informational, and All.
Facility Some of the operating system daemons and processes have been assigned Facility values. Processes and
daemons that have not been explicitly assigned a Facility may use any of the "local use" facilities or they may use
the "user-level" Facility.Those Facilities that have been designated are shown in the following: Bold font
denotes the facility values that the Switch currently implements.
Numerical Code
Facility
0 kernel messages
1 user-level messages
2 mail system
3 system daemons
4 security/authorization messages
5 messages generated internally by syslog line printer subsystem
7 network news subsystem
8 UUCP subsystem
9 clock daemon
10 security/authorization messages
11 FTP daemon
12 NTP subsystem
13 log audit
14 log alert
15 clock daemon
16 local use 0 (local0)
17 local use 1 (local1)
18 local use 2 (local2)
19 local use 3 (local3)
20 local use 4 (local4)
21 local use 5 (local5)
22 local use 6 (local6)
23 local use 7 (local7)
UDP Port (514 or 6000-65535) Type the UDP port number used for sending Syslog messages.The default is 514.
Status
Choose Enabled or Disabled to activate or deactivate.
To set the System Log Server configuration, click Apply.To delete an entry from the Current System Log Server window, click the corresponding
under the Delete heading of the entry to delete.To return to the Current System Log Servers window, click the Show All System Log Servers link.
73 Allied Telesyn AT-9724TS High-Density Layer 3 Stackable Gigabit Ethernet Switch