Allied Telesis AT-9724TS - Manual (Page 82)

Figure 6- 66.Access Rule Display window (IP)
To configure the Access Rule for Ethernet, open the Access Profile Table and click Modify for an Ethernet entry.This will open the following screen:
Figure 6- 67.Access Rule Table
To remove a previously created rule, select it and click the button.To add a new Access Rule, click the Add button:
Figure 6- 68.Access Rule Configuration window – Ethernet
To set the Access Rule for Ethernet, adjust the following parameters and click Apply.
81 Allied Telesyn AT-9724TS High-Density Layer 3 Stackable Gigabit Ethernet Switch