Allied Telesis AT-S63 - Manual (Page 816)

Chapter 34: PKI Certificates and SSL
816 Section VIII: Management Security
Viewing or Configuring the Number of Certificates in the Database
You can specify the maximum number of certificates that can be stored on
the certificate database. The range is a maximum of 12 to 256. The default
value is 256. There should be little cause or need for you to adjust this
value.
To view or change the number of certificates in the certificate database,
perform the following procedure:
1. From the Main Menu, type 7 to select Security and Services.
The Security Configuration menu is shown in Figure 86 on page 289.
2. From the Security Configuration menu, type 7 to select Keys/
Certificates Configuration.
The Keys/Certificates Configuration menu is shown in Figure 264 on
page 771. Selection 1, Maximum Number of Certificates, shows the
current setting.
3. To change the maximum number of certificates, type 1 to select
Maximum Number of Certificates.
The following prompt is displayed:
Enter certificate limit -> [12 to 256] 256
4. Enter a new number and press Return.
5. After making changes, type R until you return to the Main Menu. Then
type S to select Save Configuration Changes.