Allied Telesis AT-S63 - Manual (Page 780)

Chapter 33: Encryption Keys
780 Section VIII: Management Security
Importing an Encryption Key
Use the following procedure to import a public key from the AT-S63 file
system into the key management database. If a file contains both public
and private keys, only the public key is imported. The private key is
ignored.
Note
It is unlikely that you will ever need to perform this procedure. A
switch can only use those public keys that it has generated itself.
This procedure starts from the Key Management menu. If you are unsure
how to display the menu, perform steps 1 to 3 in “Creating an Encryption
Key” on page 771.
To import a public key, perform the following procedure:
1. From the Main Menu, type 7 to select Security and Services.
The Security and Services menu is shown in Figure 86 on page 289.
2. From the Security and Services menu, type 7 to select Keys/Certificate
Configuration.
The Keys/Certificate Configuration menu is shown in Figure 264 on
page 771.
3. From the Keys/Certificates Configuration menu, type 2 to select Key
Management.
The Key Management menu is shown in Figure 265 on page 772.
4. From the Key Management menu, type 5 to select Import Key From
File to import an RSA - Public key.