Allied Telesis AT-S63 - Manual (Page 59)

AT-S63 Management Software Menus Interface User’s Guide
Section I: Basic Operations 59
Displaying the AT-9400 Series Switch Hardware and Software
Information
To display information about the switch hardware and software, perform
the following procedure:
1. From the Main Menu, type 5 to select System Administration.
The System Administration menu is shown in Figure 4 on page 54.
2. From the System Administration menu, type 1 to select System
Information.
The System Information menu is shown in Figure 6.
Figure 6. System Information Menu
The System Information menu provides the following information:
MAC Address
The MAC address of the switch. You cannot change this parameter.
IP Address
IP address of the switch. To change a switch’s IP address, see
“Configuring the IP Address, Switch Name, and Other Basic
Parameters” on page 54.
Allied Telesyn Ethernet Switch AT-94xx - AT-S63
Marketing
User: Manager 11:20:02 02-Mar-2005
System Information
MAC Address ..... 00:30:84:00:00:00 IP Address ...... 149.35.19.155
Model Name ...... AT-9424T/SP Subnet Mask ..... 255.255.0.0
Serial Number ... S05525A023600001 Gateway ......... 0.0.0.0
System Up Time .. 30D:12H:56M:14S
Bootloader ...... ATS63_LOADER v1.0.0 Build Date ...... Feb 4 2005 19:32:40
Application ..... ATS63 v1.0.0 Build Date ...... Feb 14 2005 19:32:40
System Name ..... Marketing
Administrator ... Joe
Location ........ 3rd Floor
H - System Hardware Status
U - Uplink Information
R - Return to Previous Menu
Enter your selection?