Allied Telesis AT-S63 - Manual (Page 358)

Chapter 17: Quality of Service
358 Section II: Advanced Operations
Parent Traffic Class ID
The ID number of the traffic class to which the flow group is assigned.
A flow group can belong to only one traffic class at a time.
Active
The status of the flow group. If the flow group is part of a QoS policy
that is assigned to one or more ports, the flow group is deemed active.
If the flow group has not been assigned to a policy or if the policy has
not been assigned to any ports, the flow group is deemed inactive.
5. To display the specifics of a flow group, type D to select Display Flow
Group Details.
The following prompt is displayed:
Available Flow Group(s): 0-10
Enter Flow Group ID : [0 to 1023] -> 0
6. Enter the ID number of the flow group you want to view. You can
display only one flow group at a time.
The Display Flow Group Details menu is shown in Figure 121.
Figure 121. Display Flow Group Detail Menu
The Display Flow Group Details menu provides the following
information:
Flow Group ID
The flow group’s ID number.
Description
The flow group’s description.
Allied Telesyn Ethernet Switch AT-94xx - AT-S63
Marketing
User: Manager 11:20:02 02-Mar-2005
Display Flow Group Details
1 - Flow Group ID .............. 2
2 - Description ................ Video1
3 - DSCP value ................. 0
4 - Priority ................... 6
5 - Remark Priority ............ No
6 - ToS ........................
7 - Move ToS to Priority ....... No
8 - Move Priority to ToS ....... No
9 - Classifier List ............ 11
U - Update Display
R - Return to Previous Menu
Enter your selection?