Allied Telesis AT-S63 - Manual (Page 809)

AT-S63 Management Software Menus Interface User’s Guide
Section VIII: Management Security 809
Viewing a Certificate
This procedure displays information about a certificate, such as its
distinguished name and serial number.
This procedure starts from the X509 Certificate Management menu. If you
are unsure how to access the menu, perform steps 1 to 4 in the procedure
“Adding a Certificate to the Database” on page 801.
To view the details of a certificate, perform the following procedure:
1. From the Main Menu, type 7 to select Security and Services.
The Security and Services menu is shown in Figure 86 on page 289.
2. From the Security and Services menu, type 7 to select Keys/
Certificates Configuration.
The Keys/Certificates Configuration menu is shown in Figure 264 on
page 771.
3. From the Keys/Certificate menu, type 3 to select Public Key
Infrastructure (PKI) Configuration.
The Public Key Infrastructure (PKI) Configuration menu is shown in
Figure 270 on page 798.
4. From the Public Key Infrastructure (PKI) Configuration menu, type 2 to
select X509 Certificate Management.
The X509 Certificate Management menu is shown in Figure 271 on
page 798.
5. From the X509 Certificate Management menu, type 5 to select View
Certificate Details.
The following prompt is displayed:
Enter certificate name ->
6. Enter a name of the certificate you want to view. (This field is case
sensitive.)