Allied Telesis AT-S63 - Manual (Page 750)

Chapter 31: 802.1x Port-based Network Access Control
750 Section VII: Port Security
Configuring RADIUS Accounting
The AT-S63 management software supports RADIUS accounting for ports
operating in the Authenticator role. The accounting information sent by the
switch to a RADIUS server includes the date and time when clients log on
and log off, as well as the number of packets sent and received by a
switch port during a client session. For background information on this
feature, refer to “RADIUS Accounting” on page 732. This feature is
disabled by default on the switch.
To configure this feature, perform the following procedure:
1. From the Main Menu, type 7 to select Security and Services.
The Security and Services menu is shown in Figure 86 on page 289.
2. From the Security Configuration menu, type 2 to select Port Access
Control (802.1X).
The Port Access Control (802.1X) menu is shown in Figure 254 on
page 736.
3. From the Port Access Control (802.1X) menu, type 7 to select
Configure Accounting.
The RADIUS Accounting menu is shown in Figure 261.
Figure 261. Radius Accounting Menu
Allied Telesyn Ethernet Switch AT-94xx - AT-S63
Marketing
User: Manager 11:20:02 02-Mar-2005
RADIUS Accounting
1 - Status............ Disabled
2 - Port.............. 1813
3 - Type.............. Network
4 - Trigger Type...... Start_Stop
5 - Update Status..... Disabled
6 - Update Interval... 60
R - Return to Previous Menu
Enter your selection?