Allied Telesis AT-S63 - Manual (Page 713)

AT-S63 Management Software Menus Interface User’s Guide
Section VII: Port Security 713
Figure 245. Configure Port Security Menu #2
8. To specify the maximum number of dynamic MAC addresses you want
the port to be able to learn, do the following:
a. Type 2 to select Threshold.
The following prompt is displayed:
Enter port security threshold: [1 to 255] -> 100
b. Enter the maximum number of dynamic MAC addresses you want
the port to be able to learn. The range is 1 to 255. The default is
100.
9. To set the intrusion action for the port, do the following:
a. Type 3 to select Intruder Action.
The following prompt is displayed:
Enter intrusion action: (N-Discard, T-Trap, D-
Disable):
b. Select the desired intrusion action:
N - Discard: The port discards invalid frames. This is the default.
T - Trap: The port discards invalid frames and sends an SNMP
trap.
D - Disable: The port discards invalid frames, sends an SNMP
trap, and disables the port.
Allied Telesyn Ethernet Switch AT-94xx - AT-S63
Marketing
User: Manager 11:20:02 02-Mar-2005
Configure Port Security
Configuring Port Security 4
1 - Security Mode ..................... Limited
2 - Intruder Action ................... No Action
3 - Port Participating ................ No
4 - Threshold ......................... 100
D - Set Default Port Security
R - Return to Previous Menu
Enter your selection?