Allied Telesis AT-S63 - Manual (Page 576)

Chapter 24: Multiple Spanning Tree Protocol
576 Section V: Spanning Tree Protocols
8. After making changes, type R until you return to the Main Menu. Then
type S to select Save Configuration Changes.
Deleting an MSTI
ID
To delete an MSTI ID, perform the following procedure:
1. From the Main Menu, type 3 to select Spanning Tree Configuration.
The Spanning Tree Configuration menu is shown in Figure 177 on
page 535.
2. From the Spanning Tree Configuration menu, type 3 to select
Configure Active Protocol.
The MSTP menu is shown in Figure 194 on page 568.
3. From the MSTP menu, type M to select MSTI menu.
The MSTI menu is shown in Figure 196 on page 573.
4. Type 2 to select Delete MSTI.
The following prompt is displayed:
Enter the MSTI ID to be deleted: [1 to 15] ->
5. Enter the MSTP IDs that you want to delete. The range is 1 to 15. (You
cannot delete CIST, which has a value of 0.)
All VLANs associated with a deleted MSTP ID are returned to CIST.
6. After making changes, type R until you return to the Main Menu. Then
type S to select Save Configuration Changes.
Modifying an
MSTI ID
To change the MSTI priority value for an MSTI, perform the following
procedure:
1. From the Main Menu, type 3 to select Spanning Tree Configuration.
The Spanning Tree Configuration menu is shown in Figure 177 on
page 535.
2. From the Spanning Tree Configuration menu, type 3 to select
Configure Active Protocol.
The MSTP menu is shown in Figure 194 on page 568.
3. From the MSTP menu, type M to select MSTI menu.
The MSTI menu is shown in Figure 196 on page 573
4. Type 3 to select Modify MSTI.
The following prompt is displayed: