Allied Telesis AT-S63 - Manual (Page 81)

AT-S63 Stack Command Line Interface User’s Guide
Section I: Basic Operations 81
Note
For a list of default values, refer to Appendix A, “AT-S63 Default
Settings” in the AT-S63 Management Software Features Guide.
Your local or remote management session ends when you reset the stack.
You must reestablish the session to continue managing it.
Examples
The following command configures the stack using the configuration file
named
stack12.cfg
:
restart switch config=stack12.cfg
The following command resets all of the parameter settings in the stack to
their default values:
restart switch config=none
The following command resets the stack:
restart switch
Equivalent Command
restart reboot
For information, see “RESTART REBOOT” on page 79.