Allied Telesis AT-S63 - Manual (Page 139)

AT-S63 Stack Command Line Interface User’s Guide
Section I: Basic Operations 139
Figure 18 is an example of a multicast address.
Figure 18. SHOW SWITCH FDB Command - Multicast Addresses
The columns are defined here:
ˆ MAC Address - The static or dynamic unicast MAC address.
ˆ VLAN ID - The ID number of the VLAN where the port is an untagged
member.
ˆ Type - The type of the address: static or dynamic.
ˆ Port Maps - The tagged and untagged port members of the multicast
group.
Examples
The following command displays all the static and dynamic unicast MAC
addresses in the switch’s MAC address table:
show switch fdb
The following command displays just the static unicast MAC addresses:
show switch fdb type=static
The following command displays the static and dynamic multicast
addresses:
show switch fdb type=multicast
The following command displays just the static multicast addresses:
show switch fdb type=staticmulticast
The following command displays the port where the MAC address
00:A0:D2:18:1A:11 was learned (dynamic) or added (static):
show switch fdb address=00A0D2181A11
The following command displays the MAC addresses learned on port 3.2:
show switch fdb port=3.2
Multicast Switch Forwarding Database
Total Number of MCAST MAC Addresses: 1
MAC Address VLANID Type Port Maps (U:Untagged T:Tagged)
----------------------------------------------------------------
01:00:51:00:00:01
1 Static U:2.1-2.4
T: