Allied Telesis AT-S63 - Manual (Page 203)

AT-S63 Stack Command Line Interface User’s Guide
Section II: Advanced Operations 203
The SYSLOGFORMAT parameter defines the content of the events.
Examples
The following command creates a definition for a syslog server with the IP
address 149.65.10.22. The definition, which is given the ID 10, sends the
messages in normal format with a facility level setting of LOCAL6:
create log output=10 destination=syslog server=149.65.10.22
facility=local6 syslogformat=normal
The following command creates a definition for a syslog server with the IP
address 149.65.10.101. Because the SYSLOGFORMAT option is omitted
from the command, the messages are sent in extended format, which is
the default:
create log output=18 destination=syslog server=149.65.10.101
Table 7. Numerical Code and Facility Level Mappings
Facility Level Setting
Numerical
Code
LOCAL1 17
LOCAL2 18
LOCAL3 19
LOCAL4 20
LOCAL5 21
LOCAL6 22
LOCAL7 23