Allied Telesis AT-S63 - Manual (Page 184)

Chapter 12: File Download and Upload Commands
184 Section II: Advanced Operations
Since the file is downloaded to the switch’s file system and not to the
application block, it is not used as the switch’s active image file. If at some
point in the future you want to make it the active image file, refer to
“UPLOAD METHOD=LOCAL” on page 189.
This command downloads a configuration file called “sw12.cfg onto a flash
memory card in the switch. The configuration file retains the same name
when stored on the card. The TFTP server has the IP address
149.142.44.44:
load method=tftp destfile=cflash:sw12.cfg
server=149.142.44.44 srcfile=sw12.cfg
This command downloads an AT-S63 image file from a TFTP server to a
flash memory card in the switch:
load method=tftp destfile=cflash:ats63.img
server=149.11.11.11 srcfile=ats63.img