Allied Telesis AT-MCF2000M - Manual (Page 31)

AT-MCF2000M Management Module Installation Guide
31
SD Slot
The SD slot accommodates a secure digital memory card.
You might use a memory card in the following situations:
ˆ Storing backup copies of the configuration files from the
management and media converter modules - You can
maintain a library of past configuration files in the event
a module needs to be returned to a previous
configuration.
ˆ Transferring configuration files between chassis - You
can simplify the task of configuring units that are to have
similar configurations by configuring one of the units and
transferring its configuration files to the other units with a
secure digital memory card.
A secure digital memory card is optional. The management
module can operate without a memory card.
For information on using a secure digital memory card with
the management module, refer to the AT-S85 and AT-S97
Management Software Command Line Interface User’s
Guide.
Note
The management module supports 128 MB, 256 MB,
and 512 MB secure digital memory cards. Memory
cards are available from Allied Telesis. For ordering
information, contact your Allied Telesis sales
representative or visit our web site.
Note
Do not remove a secure digital memory card from the
management module when the slot’s L/A LED is
amber. Wait for the LED to change to green before
removing the card.