ATI Technologies Radeon X1600 User Manual
Page 99
CrossFire™ 91
3
Ensure the application override is enabled. To do so, make sure the
Let the Application Decide check box is not selected.
4
Click and drag the slider to the desired setting.
Note: The slider control becomes unavailable when Let the
Application Decide is enabled.
Set Catalyst™ A.I. settings
1
From the Tree View pane, expand 3D.
2
Click Catalyst™ A.I.
3
If necessary, clear the check mark from Disable Catalyst™ A.I.
4
Click and drag to slider to the desired setting.
Note: Change to Catalyst™ A.I. settings is not shown in the 3D
Preview.
Apply your settings
1
Click Apply
to save your changes and leave the Catalyst™ Control
Center open.
2
Click OK to save your changes and exit the Catalyst™ Control
Center.
Discard your settings
• Click Discard to ignore any unsaved changes and restore the
settings that existed when the Catalyst™ Control Center was
opened or the last time Apply was used. Discard does not close the
Catalyst™ Control Center.
Clicking
Discard
applies to all features of an aspect, not just the feature in
the current view.
Change motherboard BIOS settings
Some motherboards may have a system BIOS option to switch between
single or dual PCIe™ slot support. The default setting may be single slot
support.
Refer to the motherboard’s manual for information to enable dual PCIe™
slot support.
For more information see the CrossFire™ Web page at: