ATI Technologies Radeon X1600 - Manual (Page 57)

Digital Panel Properties 49
Apply your settings
1 Click Apply to save your changes and leave the Catalyst™ Control
Center open.
2 Click OK to save your changes and exit the Catalyst™ Control
Center.
Restore default settings
1 Move the mouse to the bottom right-hand corner of the window.
2 Click Defaults.
Note: Clicking Defaults will restore the defaults for the current view
only. Previous settings are not altered and will be saved once you
click OK.
Discard your settings
• Click Discard to ignore any unsaved changes and restore the
settings that existed when the Catalyst™ Control Center was
opened or the last time Apply was used. Discard does not close the
Catalyst™ Control Center.
Clicking Discard applies to all features of an aspect, not just the feature in
the current view.
Digital Panel Properties
Use the Digital Panel Properties aspect to configure the DVI settings and
Image Scaling to improve image quality without impacting performance.
Use HDTV Support to add EDID information (containing information
about the capabilities of the display) about your connected HDTV display
to the Force button in Displays Manager.
Note: Catalyst™ Control Center loads aspects dynamically based on
what device is attached to the graphics card. If you have standard
display device such as a CRT monitor or flat panel display Monitor
Properties will appear instead of Digital Panel Properties. The latter
is designed for use with such devices as HDTV displays.