ATI Technologies Radeon X1600 - Manual (Page 65)

Standard Settings 57
Adjust your Standard settings
The default selection is Balanced.
1 From the Tree View, click 3D.
2 Click Standard Settings.
3 If necessary, remove the check mark from Use custom settings.
4 Click and drag the Control slider to the left to select High or Optimal
Performance, or to the right to select High or Optimal Quality.
Preview your changes
• The preview image automatically displays your adjustments.
Optionally, double-click 3D Preview for a full-screen view of the
adjustments you have made. To exit full-screen Preview, press the Esc key.
The Preview can be disabled by clicking the “X” button in the Preview
pane. It can also be paused by clicking the “||” button in the Preview pane.
Clicking the pause button again causes the preview to resume.
Apply your settings
1 Click Apply to save your changes and leave the Catalyst™ Control
Center open.
2 Click OK to save your changes and exit the Catalyst™ Control
Center.
Discard your settings
• Click Discard to ignore any unsaved changes and restore the
settings that existed when the Catalyst™ Control Center was
opened or the last time Apply was used. Discard does not close the
Catalyst™ Control Center.
Clicking Discard applies to all features of an aspect, not just the feature in
the current view.
Restore default settings
1 Move the mouse to the bottom right-hand corner of the window.
2 Click Defaults.
Note: Clicking Defaults will restore the defaults for the current view
only. Previous settings are not altered and will be saved once you
click OK.