Samsung ER-GX20ZBBB-E1 - Manual (Page 91)

090
1. Set the number of frames.
- Turn the front dial( ) while pressing the
exposure bracket button ( ). Select 3 or 5.
2. Set the step interval. Turn the rear dial
( ) while pressing the exposure
bracket button ( ).
You can change the available bracketing
amounts by setting the [ EV Steps] in the
[ CUSTOM1 MENU].
3. Press the shutter release button halfway.
- Focus indicator ( ) appears in the viewfi nder when focused.
4. Press the shutter release button fully.
- If you set [ No. of Shots] to “3,” the fi rst frame is exposed with no compensation,
the second frame is under-exposed (negative compensation) and the third is
over-exposed (positive compensation).
5. If you want to cancel the auto bracket function, set the number of shots to
OFF using the front dial. Press and hold the exposure bracket button ( )
while using the front dial ( ).
Changing the Exposure and Shooting (Auto Bracket) Changing the Exposure and Shooting (Auto Bracket)
You can take continuous pictures with different exposure when the shutter
release button is pressed. The fi rst frame is exposed with no compensation,
the second frame is under-exposed (negative compensation) and the third is
over-exposed (positive compensation).
You can set [ Bracketing Order] in the [ Bracketing Order Bracketing Order CUSTOM2 MENU] menu.
▲ Under exposure ▲ Over exposure ▲ Normal exposure