Samsung ER-GX20ZBBB-E1 - Manual (Page 87)

086
You can select your own exposure settings for the shutter speed, aperture
stop, and ISO set value.
Pressing the green button ( ) on your camera automatically sets the
exposure for the appropriate brightness while using the
M (Manual) mode.
M (Manual) Mode M (Manual) Mode
1. Rotate the Mode dial ( ) to select M.
2. Set your own exposure value for the shutter
speed and aperture using the front dial
( ) and rear ( ) dials.
3. Set your own ISO sensitivity value using
the Fn > direction button (►).
4. Now, you are ready to take some pictures.
EV Bar
The EV bar appears in the LCD panel and
viewfi nder in
M (Manual) mode. The appropriate
exposure is set when V is in the middle of the
EV bar. If it is towards -, it is underexposed. If it is
towards +, it is overexposed. If the value exceeds the range of the EV bar,
the “+” or “-” blinks.
AE-L in M mode
Press the AE-L button ( ) to record the exposure value in M (Manual) mode.
If the shutter speed or aperture is then changed, the combination of shutter speed
and aperture changes while exposure is retained.
Example) If the shutter speed is 1/125 sec and aperture is F5.6 and is recorded with
the AE-L button ( ), and the shutter speed is changed to 1/30 sec
with the front dial ( ), the aperture automatically changes to F11.
: Set : Move
100
ISO SENSITIVITY
Using the manual mode to choose your own camera settings Using the manual mode to choose your own camera settings
▲ EV Bar
▲ Before setting the exposure using the
green button ( ).
▲ After setting the exposure using the
green button ( ).