beautypg.com

Setting the exposure, Selecting the metering method, Exposure compensation – Samsung ER-GX20ZBBB-E1 User Manual

Page 48

background image

047

Setting the Exposure

Selecting the Metering Method

Choose the part of the screen to use for measuring brightness and
determining exposure.

Multi-segment

metering

Segment the screen in 16 parts, meter each portion and

determine the appropriate exposure.

Centre-weighted

metering

Measure the entire screen with an emphasis on the centre

and determine the exposure.

Spot metering

Measure only the centre of the screen and determine

exposure.

h Set with the metering mode lever.

Exposure Compensation

This allows you to deliberately over expose (brighten) or under expose (darken)
your picture. You can adjust the EV Compensation from -3 to +3 (EV) in
increments of 1/2 EV or 1/3 EV. For information about under or over exposed
samples, see page 90, “Changing the Exposure and Shooting (Auto Bracket).”

1. Set the compensation with the front dial

(

) while the

button is pressed.

2. Confi rm the compensation value in the

viewfi nder.

“+” or “-” appears during compensation.

● Exposure compensation is not available when the exposure mode is set

to

(Auto mode), M (Manual), B (Bulb), and X (Flash synchro) mode.

● The exposure compensation is not cancelled by turning the camera off

if you select the [EV Compensation] in the [Memory of Settings] of

[CAPTURE MENU].

● The is set to 0 when

button and green button ( ) are pressed at

the same time.

Compensation value

The metering mode lever

The metering mode Indicator

This manual is related to the following products: