Samsung ER-GX20ZBBB-E1 - Manual (Page 37)

036
Using the full automatic program mode
Using the Drive Mode
You can select the continuous shooting or self-timer function using the DRIVE
mode. This chapter explains the [Continuous Shooting (Hi)] mode for
example.
1. Press the Fn button on your camera and
then press the direction button (▲).
- The Drive Mode options screen appears.
- If the AF mode is not set to SEL, you can
directly press the direction buttons (▲) to use
the drive mode.
2. Select the [( ) Continuous Shooting (Hi)]
using the direction buttons (◄►) and then
press the OK button.
- The camera is ready to take pictures.
3. Continuous shooting starts as soon as you press and the hold the shutter
button.
● If you set [Remaining Count] to [Continuous] from the [Custom2
MENU], the maximum continuous-shootable images appears in the
view fi nder on half shutter.
● The focus is adjusted each time the shutter is released while exposure
metering timer is set (shutter release button is pressed halfway) if the
focus mode is set to SAF (Single mode).
● Focusing is continuously active when the focus mode is set to CAF
(Continuous mode).
● Note that in CAF (Continuous mode) / MF (Manual mode), the shutter
will release when the shutter release button is pressed fully even if
focusing is not complete.
● The shutter cannot be released until charging is complete when using
the built-in fl ash.
● To take a picture while charging the built-in fl ash, set [Release in
Charging] to [On] in the [CUSTOM2 MENU]. : Set : Move
Single Frame Shooting
DRIVE
: Set : Move
Continuous Shooting (Hi)
DRIVE