Using the menu, Ois (optical image stabilization) – Samsung ER-GX20ZBBB-E1 User Manual

Page 60

059

Using the Menu

Memory of Settings

You can select which settings to save when the camera is turned off.

Drive

White Balance

ISO Sensitivity

EV Compensation

Flash

Extended Bracket

Playback Display

Flash power

The settings are maintained

when the camera is turned off.

The settings are reset when

the camera is turned off.

File No.

New ﬁles are named using

numbers that follow the

previous sequence, even

when a new memory card is

used, or after formatting, or

after deleting all pictures.

After using the reset function,

the next ﬁle name will be set

from 0001 even after

formatting, deleting all or

inserting a new memory card.

OIS (Optical Image Stabilization)

OIS (Optical image Stabilization) helps
the user capture sharp images by
reducing camera shake/vibration. Optical
Image Stabilization is especially useful when
using a low shutter speed which may cause
camera shake.

If you use the lens that does not support the automatic information about
the focal length, you can manually select the available focal length to enable
the OIS function.

1. Select [

OIS] menu in the [CAPTURE MENU].

2. Press the direction buttons (◄►) on your

camera to set the [

Focal Length]. Select

from the following focal length values.

Focal

Length

100

120

135

150

180

200

250

300

350

400

450

500

550

600

700

800

● If the focal length for your lens is not listed above, select the value closest

to the actual focal length.

● When using a zoom lens, select the actual focal length at the zoom setting

in the same manner.

CAPTURE MENU

: Move

: Exit

User Registration
Interval Shooting
Extended Bracket
Multi Exposure
Memory of Settings

OIS

Off
Off

Auto

Memory of Settings

: Set

: Back

Drive
White Balance
ISO Sensitivity
EV Compensation
Flash
Extended Bracket

Optical Image Stabilization