Samsung ER-GX20ZBBB-E1 - Manual (Page 77)

076
Using the Menu
● It is recommended that you use a tripod for a more accurate set value.
● You can use the [AF fi ne
adjustment] function as
in the following images for
example. Both pictures are
taken while focusing on
the centre area (the ball
located in the centre) in the
viewfi nder.
Reset
Resets all settings other than [Date/Time], [Language/ ], [Video Out],
[CUSTOM1 MENU], and [CUSTOM2 MENU].
• Reset : Resets all settings.
• Cancel : Does not reset camera settings.
Pixel Mapping
If noise is found in the image, you can eliminate the bad pixels by using
[Pixel Mapping].
AF fi ne adjustment
If there is a slight difference in focusing point among lenses, users can fi nely
adjust it by setting the AF fi ne adjustment function. Lenses that are registered
as [All Types] and [One Type] can be adjusted. AF fi ne-tuning is available for
up to 20 registered lenses. Lens ID is required for [AF fi ne adjustment].
- If add stops on (+), the current depth of fi eld will move to the closer range of
(unclear) your camera.
- If add stops on (-), the current depth of fi eld will move to the far range of (unclear)
your camera.
SETUP MENU
: Move : Exit
Dust Alert
Pixel Mapping
AF fine adjustment Off
Reset
AF fine adjustment
: Set : Back
AF fine adjustment Off
Reset AF fine adjustment
SETUP MENU
: Move : Exit
Dust Alert
Pixel Mapping
AF fine adjustment Off
Reset
Reset
: Set : Back
Reset
Cancel
Revert to initial settings
SETUP MENU
: Move : Exit
Dust Alert
Pixel Mapping
AF fine adjustment Off
Reset
Pixel Mapping
: Back : Set
For checking the image
sensor assembly to make
adjustments
Execute
Cancel
▲ AF range is far
from the target
you focused on.
▲ Adding stops on
the plus (+), the
current depth of
fi eld has moved
to the target point.