beautypg.com

Using an external flash (sold separately), Using p-ttl auto mode, Using high-speed flash sync mode – Samsung ER-GX20ZBBB-E1 User Manual

Page 107

background image

106

Using P-TTL Auto Mode

Use this fl ash mode with the SEF-36PZF or SEF-54PZF fl ash unit. When
fl ash mode is set to [P-TTL auto], the fl ash pre-fi res right before taking pictures
using 16-segment metering and allows more precise control. P-TTL auto mode
is available with SEF-54PZF and SEF-36PZF models while using a wireless
connection.

1. Remove the cover of the hot shoe and attach the external fl ash

(SEF-36PZF or SEF-54PZF).

2. Turn on the external fl ash.

3. Using the external fl ash, P-TTL mode is automatically set to use.

4. Confi rm that the external fl ash is fully charged and then take the picture.

● P-TTL auto is only available with the SEF-36PZF or SEF-54PZF fl ash

unit.

● The will light in the viewfi nder when the fl ash is ready (fully charged).
● For details such as operation method and effective distance, please read

the external fl ash manual.

● The fl ash does not discharge when the subject is bright enough when

Flash Mode is [Auto ( )] or [Auto+Red-eye (

)]. Therefore, it may not

suitable for daylight-sync shooting.

● Never press the fl ash pop up button( ) when any external fl ash unit is

attached to the camera. The built-in fl ash will hit the external fl ash.

● See the SEF-36PZF or SEF-54PZF operating manual for details.

Using High-Speed Flash Sync Mode

With the SEF-36PZF or SEF-54PZF, you can discharge the fl ash to take a
picture at a shutter speed faster than 1/180 second. More than two external
fl ashes are required for a wireless connection.

■ Attaching and Using the SEF-36PZF or SEF-54PZF on the Camera

1. Remove the hot shoe cover and attach the external fl ash (SEF-36PZF or

SEF-54PZF).

2. Rotate the Mode dial (

) to select Tv or M.

3. Turn on the Camera and external fl ash.

4. Set the external fl ash sync mode to HS (high-speed fl ash sync.).

5. Confi rm that the external fl ash is fully charged and then take the picture.

● The will light in the viewfi nder when the fl ash is ready (fully charged).
● High-speed fl ash sync is only available when the shutter speed is faster

than 1/180sec.

● High-speed fl ash sync is not available when the exposure mode is set to

B (Bulb).

● See the SEF-36PZF or SEF-54PZF operating manual for details.

Using an External Flash (Sold Separately)

This manual is related to the following products: