beautypg.com

Ois (optical image stabilization), Turning on the ois function, Optical image stabilization – Samsung ER-GX20ZBBB-E1 User Manual

Page 27

background image

026

OIS (Optical Image Stabilization)

Turning On the OIS Function

Turn on the OIS switch. When the shutter
release button is pressed halfway,

appears

in the viewfi nder and the OIS function turns on.

Optical Image Stabilization

The OIS function reduces camera shake that occurs when the shutter
release button is pressed. This is useful for taking pictures in situations where
camera shake is likely to occur. The OIS function allows you to take pictures
at approximately 2 to 3.5 steps slower shutter speed without the risk of the
camera shake. The OIS function is ideal when taking pictures in the following
situations.

- When taking pictures in dimly lit locations, such as indoors, at night, on cloudy

days and in the shade

- When taking telephoto pictures

● The OIS function does not compensate for blurring caused by

movement of the subject. To take pictures of a moving subject,

increase the shutter speed.

● The OIS function may not fully reduce camera shake when taking

close-up shots. In this case, it is recommended that the OIS function

be turned off and the camera be used with a tripod.

● The OIS function will not fully work when shooting with a slower shutter

speed, for example when shooting a moving subject or night scenes.

In this case, it is recommended that the OIS function be turned off and

the camera be used with a tripod.

● Turn the OIS switch off if you will not be using the OIS function.
● The OIS function will not fully work (for about 2 seconds) right after

turning on the camera or restoring from Auto Power Off. Wait for the

OIS function to become stable before gently pressing the shutter

release button to take a picture. Press the shutter release button

halfway. The camera is ready to take pictures when icon appears in the

viewfi nder.

● Be sure to turn off the OIS switch when using the camera with a tripod.
● The OIS function automatically turns off in the following situations.

When using self-timer, remote control shooting, bulb shooting, or

wireless mode with an external fl ash.

● For more information about OIS(Optical Image Stabilization), see page

59.

Blurred picture

Picture taken with the OIS function

This manual is related to the following products: