Samsung ER-GX20ZBBB-E1 User Manual
Page 82
081
P (Program) mode supports both Tv (Shutter Priority) and
Av (Aperture Priority) modes.
■ To change the shutter speed
You can switch to Shutter Priority automatic exposure by turning the front dial (
) in P (Hyperprogram) mode.
- You can only set the shutter speed to a value
that is in relation to aperture.
- If the brightness changes and the aperture value
is outside the relative range, the aperture will
blink in the viewfi nder and on the LCD panel.
■ To change the aperture
You can switch to Aperture Priority automatic exposure by turning the rear dial (
) in P (Hyperprogram) mode.
- You can only set the aperture to a value that is in
relation to shutter speed.
- If the brightness changes and the shutter speed
is outside the relative range, the shutter speed
will blink in the viewfi nder and on the LCD panel.
- Press the Green button ( ) to return to Hyper-
program automatic exposure.
● All the program modes have different uses of the front dial (
) and
rear dial (
) depending on the set values.
● When using the P (Program) mode, you can change the ISO sensitivity by
using the front dial (
) while pressing and hold the OK button.
Using the best programmed exposure, P (Program) mode