Samsung SC-D6550-XAC - Manual (Page 89)

ENGLISH
85 85
Numbering Stored Pictures
Digital Still Camera Mode : Functions
✤ File numbers are given to images in the order they were recorded when they are stored on the Memory
Card.
✤ You can reset the numbering back to DCAM0001 at any time by setting the FILE to RESET.
1. Set the Power switch to (CAMERA).
2. Press the MENU button.
3. Move the Joystick to the left or right to select (SETUP).
■ The SETUP menu list will appear.
4. Move the Joystick up or down to select FILE, then move the Joystick to the right.
■ The RESET and SERIES options are displayed.
-
RESET: When there are no files stored on the Memory card, the file numbering starts
from 0001.
- SERIES: When there are existing files, the image will be named as the number in the
sequence.
5. Select your option by moving the Joystick up or down, then press the Joystick(OK) or MENU
button.
■ The selected option is applied.
[ Notes ]
■ The file numbers start from DCAM0001 at the time of purchase.
■ Moving images are stored in the folder DCIM.
■ File numbering for a Memory Card that contains image files from another device, will begin after the largest
number.
■ A previously formatted Memory Card using a personal computer might require reformatting.
■ DCF ERROR message is displayed when it exceeds the limit. If this occurs, delete files or format your Memory
Card after moving your data stored in the Memory Card to a PC.
1
SETUP
FILE
LANGUAGE
FORMAT
LCD
USB RESET
SERIES
2592
BACK: SET:OK
4