Samsung SC-D6550-XAC - Manual (Page 151)

ENGLISH
Troubleshooting
147 147
✤ If your device fails to function as expected, please check the following before contacting service personnel. Refer to the page
numbers listed for further details.
TAPE END!
TAPE END!
TAPE!
PROTECTION!
D
L
C
R
NO CARD!
CARD FULL!
NO IMAGE!
FILE ERROR!
CARD ERROR!
NOT FORMATTED !
Slow
Slow
No
Slow
Slow
Slow
Slow
Slow
Slow
Slow
Slow
Slow
Slow
The battery pack is almost
discharged
When the remaining time on the
tape is less than 2 minutes
Cassette has reached its end
No cassette tape is inserted
The tape is Record Protected
Camcorder has a mechanical fault
Moisture condensation
No memory card is inserted
Not enough space for saving
images
There are no images recorded to
play
The image file has an error
Memory card is formatted by other
device or has error in system folder
The Memory Card needs to format.
Change to a charged one or connect to other power
source
Prepare a new cassette
Change to a new cassette
Insert a tape
Change to a new cassette or release the tape record
protection
1. Eject the cassette tape.
2. Set to off
3. Detach the battery.
4. Restart the camcorder
If problem continues, contact your local service
representative.
See page 9
Insert a memory card
Change to a new memory card or delete recorded
images
Record a new still image
Delete the image or format the memory card
Format the memory card using the Camcorder menu
Format a Memory Card. (see page 135)
Self Diagnosis Display
Display Blinking Informs that… Action