Samsung SC-D6550-XAC - Manual (Page 135)

✤ This function changes the starting image that is displayed when the camera is turned on.
✤ You can select and resize a still image to appear as your new start-up image.
1. Set the Power switch to (CAMERA).
2. Press the MENU button.
3. Move the Joystick to the left or right to select (MYCAM).
4. Move the Joystick up or down to select START IMAGE 3, then press the Joystick(OK).
■ The selected option is applied.
■ You must first select an image to save in START IMAGE 3. (See page 128)
[ Notes ]
■ START IMAGE 1 and START IMAGE 2 are Samsung logo images and cannot be changed.
■ Formatting or deleting the still image on the memory card does not affect the start-up
images. Start-up images are saved in the built-in internal memory of the Camcorder.
ENGLISH
131 131
Digital Still Camera Mode : Advanced Techniques
Customizing Your Camera – Changing the Start-Up Image
1
4
MYCAM
OFF
START IMAGE 1
START IMAGE 2
START IMAGE 3
2592