Samsung SC-D6550-XAC - Manual (Page 81)

ENGLISH
77 77
IEEE 1394 Data Transfer
■ CPU: faster Intel ® Pentium III™ 450MHz compatible.
■ Operating system: Windows ® 98SE, ME, XP, Mac OS (9.1~10.2)
■ Main memory: more than 64 MB RAM
■ IEEE1394 add-on card or built in IEEE1394 card
1. Set the Power switch to PLAY.
2. Connect the DV cable (not supplied) from the DV jack of the Camcorder
to the DV jack of the other DV device.
■ Make sure that is displayed on the LCD screen.
3. Press the Start/Stop button to begin REC PAUSE mode.
■ PAUSE is displayed on the LCD screen.
4. Start playback on the other DV device while you monitor the picture.
5. Press the Start/Stop button to start recording.
■ If you want to pause recording momentarily, press the Start/Stop button again.
6. To stop recording, press the
■ (STOP) button.
[ Notes ]
■ When using this Camcorder as a recorder, the pictures that appear on a monitor may seem uneven,
however recorded pictures will not be affected.
■ Operation is not guaranteed for all the recommended computer environments mentioned above.
Recording with a DV Connection Cable
System Requirements