Samsung SC-D6550-XAC - Manual (Page 58)

ENGLISH
54 54
The Camcorder : Advanced Recording
✤ The Wind Cut function works in both REC and PLAY (Audio dubbing) modes.
✤ Use the Wind Cut function when recording in windy places such as the beach or near buildings.
✤ The Wind Cut function minimizes wind noise or other noise while recording.
- When the wind cut is on, some low pitched tones are eliminated along with the sound of
the wind.
1. Set the Power switch to REC or PLAY.
2. Press the MENU button.
3. Move the Joystick up or down to select Record, then press the Joystick(OK).
4. Move the Joystick up or down to select Wind Cut, then press the Joystick(OK).
5. To activate the Wind Cut function, move the Joystick up or down to select On,
then press the Joystick(OK).
6. To exit, press the MENU button.
■ Wind Cut ( ) icon will be displayed.
[ Note ]
Make sure Wind Cut is set to off when you want the microphone to be as sensitive as possible.
Cutting Off Wind Noise (Wind Cut)
Move Select Exit MENU OK
REC Mode
√Record
Rec Mode
Audio Mode
Wind Cut Off
On
5
60min
0:00:10 SP STBY
6
REC Mode
√Record
Rec Mode
Audio Mode
Wind Cut √SP
√12Bit
√Off
Move Select Exit MENU OK
3