Samsung SC-D6550-XAC - Manual (Page 71)

ENGLISH
67 67
Searching for a Photo Image
✤ Photo image recording works only in REC mode.
1. Set the Power switch to REC.
2. Press the PHOTO button.
■ The still picture is recorded for about 6~7 seconds.
3. After the PHOTO has been recorded, the Camcorder returns to STBY mode.
✤ The Photo Search works only in PLAY mode.
✤ You can use photo searching by using the PHOTO SEARCH button on the remote control.
1. Set the Power switch to PLAY.
2. Press the MENU button.
■ The menu list will appear.
3. Move the Joystick up or down to select Tape, then press the Joystick(OK).
4. Move the Joystick up or down to select Photo Search, then press the Joystick(OK).
5. Press the œœ/√√(REW/FF) buttons to select the photo.
■ The photo search process appears on LCD screen while you are searching.
■ After completing the search, the Camcorder displays the still image.
6. To exit, press the
■ (STOP) or MENU button.
[ Notes ]
■ Photo image recording is not available while recording.
■ You can use photo image recording by using the PHOTO button on the remote control.
Pressing the PHOTO button on the remote control records the still image at once with automatic
focusing.
■ When there are no still images recorded on the tape, it will be fully rewound or forwarded.
■ Photo image recording is not available while Color Nite or 16:9 Wide is in use.
■ DIS, Digital Zoom, Color Nite and Digital Effect are not available, when photo image recording.
■ Photo image recording while EASY.Q, DIS or Digital Zoom mode is in use will release current
mode. (After a photo image is taken, the mode will return automatically.)
The Camcorder : Advanced Recording
Photo Image Recording
√Sound[1]
Move Select Exit MENU OK
PLAY Mode
√Tape
Photo Search
Audio Select
Search Cancel Exit MENU OK œ œœ œ /√ √√ √
SP
25min
Photo searching...
0:44:38:03
Search Cancel Exit MENU OK œ œœ œ /√ √√ √
SP 0:41:56:10
25min Photo Search
4
6
Photo Search