Samsung SC-D6550-XAC - Manual (Page 107)

ENGLISH
103 103
Delayed Recording – Self Timer
Digital Still Camera Mode : Basic Image Taking
✤ Self Timer function works in (Program), (Movie), M, S, A and SCENE modes.
✤ Using the remote control, delaying the shutter release (in order to take self-photography and
various other camera uses) is available.
1. Set the Power switch to (CAMERA).
2. Set the Mode Dial to (Program), (Movie), M, S, A or SCENE.
3. Press the MENU button.
4. Move the Joystick to the left or right to select
(SELF TIMER).
■ The available options are listed.
OFF - 2s SELF - 10s SELF
5. Select an option by moving the Joystick up or down, then press the Joystick(OK) or
MENU button.
■ The icon of the selected mode will be displayed and automatically exits from the menu
screen.
■ You can also set the Self Timer by pressing the SELF TIMER button on the Remote
Control until the desired option is displayed.
-
: Delays the shutter release by 2 seconds.
- : Delays the shutter release by 10 seconds.
6. Frame your subject.
7. Press the PHOTO button on the Remote Control or on the Camcorder to start the timer.
For moving images, press the Start/Stop button on the Remote Control or on the
Camcorder.
■ A beep sound will be played and after the time indicated, recording starts.
[ Notes ]
■ Do not obstruct the remote control sensor by putting obstacles between the remote control
and Camcorder.
■ The remote control range is 4 ~ 5m (13 ~ 17 ft).
■ The effective remote control angle is up to 30 degrees left/right from the center line.
■ Using a tripod is recommended for delayed recording.
SELF TIMER
OFF
2s SELF
10s SELF
NOR
2592
2
08:27 PM
2005.01.01
7
4
5
5 7