Samsung SC-D6550-XAC - Manual (Page 46)

ENGLISH
42 42
The Camcorder : Basic Recording
✤ The EASY.Q mode works only in REC mode.
✤ The EASY.Q mode allows a beginner to easily make good recordings.
1. Set the Power switch to REC.
2. By pressing the EASY.Q button, all functions on the Camcorder will be set to off and the
recording settings will be set to the following basic modes:
■ Battery level, recording mode, counter, date/time, and DIS ( ) will be displayed.
■ The word EASY.Q will appear on the LCD screen at the same time.
However, the Date/Time will only be seen if it has been previously set. (see page 35)
3. Press the Start/Stop button to start recording.
Recording will begin using the basic automatic settings.
4. Press the EASY.Q button again in the STBY mode and then turn the EASY.Q mode off.
■ The EASY.Q function will not turn off while you are recording.
■ The camcorder will return to the settings that were set prior to activating EASY.Q mode.
[ Notes ]
■ In EASY.Q mode, certain functions are not available, such as Menu, BLC, Manual focus.
If you want to use these functions, you must first turn the EASY.Q mode off.
■ The EASY.Q mode settings are released when the Battery pack is removed from the Camcorder
and must be reset when the Battery pack is replaced.
■ EASY.Q mode will not turn off during a recording.
■ Photo image recording using the PHOTO button while EASY.Q is set releases DIS function.
■ Digital Zoom, Color Nite or Digital Effect is not available in the EASY.Q mode.
Using EASY.Q Mode (for Beginners)
60min
0:00:10 SP STBY
ENGLISH
2
1