Samsung SPH-M560BLASPR - Manual (Page 65)

Se
ttin
g
s
2C. Settings 49
To set your phone to always vibrate in addition to any ringer
settings:
1. Press the volume button up or down in standby
mode until a volume setting appears on the
screen.
2. Press VIB ON (left softkey). (If you have already
checked the option, pressing VIB ON (left softkey)
again deselects the option.)
Silence All
The Silence All option allows you to mute all sounds
without turning your phone off.
To activate Silence All:
ᮣ Press and hold the volume button down in standby
mode. (You will see “Silence All.”)
To deactivate Silence All:
ᮣ Press the volume button up repeatedly to select a
volume level.
Alert Notification
Set your phone to alert you with an audible tone when
you change service areas, once a minute during a
voice call, or when a call has been connected.
1. Highlight and press > Settings > Sounds >
Alerts .
2. Highlight Minute Beep , Services , Connect , Signal Fade/
Call Drop , Power On , or Power Off and press .
3. Highlight On or Off and press .
Selecting a Key Tone
Your phone offers a number of options for selecting the
audible tones accompanying a keypress.
1. Highlight and press > Settings > Sounds >
Key Tone .
2. Highlight an option and press .
Ⅲ Tone Type to select the sound of a keypress.
Ⅲ Tone Volume to select a keypress volume level.
Sprint M560.book Page 49 Tuesday, March 2, 2010 3:37 PM